Product Details:
Temperature Range | -200 to 600 deg C |
Accuracy | Class B |
Sensor Connection Wiring | 2 Wire |
Application | Industrial |
Termination Type | Lead Wire |
Process Connection Type | Threaded (NPT/BPT) |
Probe Material | Stainless Steel |
Probe Diameter | 0.5 - 8 mm |
Cable Length | 2 m |
Material Grade | SS310 |
Brand | Recos |
Freequency | 50Hz |
Temperature sensor is a device that is designed to measure the degree of hotness or coolness in an object. The working of a temperature meter depends upon the voltage across the diode. The temperature change is directly proportional to the diode’s resistance. The cooler the temperature, lesser will be the resistance, and vice-versa.
An RTD (Resistance Temperature Detector) is a sensor whose resistance changes as its temperature changes. The resistance increases as the temperature of the sensor increases. The resistance vs temperature relationship is well known and is repeatable over time. An RTD is a passive device. It does not produce an output on its own. External electronic devices are used to measure the resistance of the sensor by passing a small electrical current through the sensor to generate a voltage. Typically 1 mA or less measuring current, 5 mA maximum without the risk of self-heating.
The DIN standard specifies a base resistance of 100 ohms at 0°C, and a temperature coefficient of .00385 Ohm/Ohm/°C. The nominal output of a DIN RTD sensor is shown below:
There are three standard tolerance classes for DIN RTDs. These tolerances are defined as follows:
DIN Class A: ±(0.15 + .002 |T|°C)
DIN Class B: ±(0.3 + .005 |T|°C)
DIN Class C: ±(1.2 + .005 |T|°C)
Features:
Application/Usage: Industrial
Material: Stainless Steel
Accuracy: Class B
Product Details:
Temperature Range | -200 to 600 deg C |
Accuracy | 1/3 DIN |
Sensor Connection Wiring | 4 Wire |
Application | Industrial |
Termination Type | Jack |
Process Connection Type | Bayonet |
Probe Material | Stainless Steel |
Material Grade | SS316 |
Brand | RECOS |
Product Details:
Size | As per as Customer's Requierment |
Material | Stainless Steel |
Brand | RECOS |
Temperature | AS per as Customer's Requierment |
Length | AS per Customer's Requierment |
Accuracy | CLASS-A |
Number Of Core | 2/3/6 |
Product Details:
Temperature Range | -200 to 600 deg C |
Accuracy | Class A |
Sensor Connection Wiring | 3 Wire |
Application | Plastic Industry |
Termination Type | Terminal Head Assembly |
Process Connection Type | Threaded (NPT/BPT) |
Probe Material | Stainless Steel |
Probe Diameter | 0.5 - 8 mm |
Probe Length | 150 - 300 mm |
Material Grade | SS316 |
Pt100 sensors are the most common type of platinum resistance thermometer. Often resistance thermometers are generally called Pt100 sensors, even though in reality they may not be the Pt100 type. Pt refers to that the sensor is made from Platinum (Pt). 100 refers to that at 0°C sensor has a resistance of 100 ohms (Ω).
A resistance thermometer is a type of temperature sensor. It consists of an element that uses resistance to measure temperature.
Pt100 sensors can be protected in several ways and the temperature sensors designed to get the best measurement of your process.