Thermocouple Sensor

Product Details:

Recos S Type  Thermocouple(Platinum Rhodium - 10% / Platinum): The Type S is used in very high temperature applications. It is commonly found in the BioTech and Pharmaceutical industries. It is sometimes used in lower temperature applications because of its high accuracy and stability. The type S is often used with a ceramic protection tube.

Type S Temperature Range:

• Maximum continuous operating temperature: up to 2,912F (1600C)
• Short term use: up to 3,092F (1,700C)
• Thermocouple grade wire, -58 to 2700F (-50 to 1480C)
• Extension wire, 32 to 392F (0 to 200C)

Accuracy (whichever is greater):

• Standard: +/- 1.5C or +/- .25%
• Special Limits of Error: +/- 0.6C or 0.1%

Product Details:

Type J thermocouple is a very common and general purpose thermocouple. It has smaller temperature range and a shorter lifespan at higher temperatures. It consist of positive leg  made of an Iron wire and negative leg made of an Constantan ( Copper-Nickel ) alloy wire. Due to the Curie Point of the iron at 770 °C Type J has a limited temperature range of -40°C  to 750°C.It should not be used at high temperatures in an oxidizing atmosphere as iron undergoes a molecular change and permanently loses its standard voltage output versus temperature. It does not recover when the iron is cooled. Type J has sensitivity of approx 50 microvolts/ degree C .The expenses and reliability of Type J is same as Type K. For proper working of J Type thermocouple reduction atmosphere is desired and use at low temperature  is also not recommended.

Features: High stability
Superior performance
User-friendly device
Reliable performance
Accurate temperature measurement
Wide measurement range

Product Details:

We provide finest quality R Type Thermocouple to our respected clients.

 High accuracy, only little variation among products, and stable in application atmosphere.2. Resistance against oxidation and chemically aggressive material.3. Used as a reference temperature sensor.4. Usable at very high temperatures
Specification : 

Material: Stainless Steel
Accuracy: Class A
Price Range- 200/- to 5000/- piece

Product Details:

Type K Thermocouple (Nickel-Chromium / Nickel-Alumel): The type K is the most common type of thermocouple. It's inexpensive, accurate, reliable, and has a wide temperature range. The type K is commonly found in nuclear applications because of its relative radiation hardness.

A Type K thermocouple refers to any temperature sensor containing Chromel and Alumel conductors, that meets the output requirements as stated in ANSI/ASTM E230 or IEC 60584 for Type K thermocouples. This may be an immersion sensor, a surface sensor, wire or another style of sensor or cable

Product Details:

Relying on our expertise in this domain, we are engaged in offering K Type Thermocouple to our respected clients.

K types are more generally used at temperatures above 540 degrees C. To limit excessive error, the recommended usage is in oxidizing or completely inert atmospheres with a range of −200° to 1,260° C. All thermocouples have some disadvantages. They need to be calibrated very carefully before usage.

A Type K thermocouple refers to any temperature sensor containing Chromel and Alumel conductors, that meets the output requirements as stated in ANSI/ASTM E230 or IEC 60584 for Type K thermocouples. This may be an immersion sensor, a surface sensor, wire or another style of sensor or cable

Specification : 

Material: Stainless Steel
Accuracy: Class A

Price Range- 200/- to 5000/- Piece

Product Details:

We are involved in providing a high-quality array of 2 Wire RTD Sensors.

Temperature sensor is a device that is designed to measure the degree of hotness or coolness in an object. The working of a temperature meter depends upon the voltage across the diode. The temperature change is directly proportional to the diode’s resistance. The cooler the temperature, lesser will be the resistance, and vice-versa.

An RTD (Resistance Temperature Detector) is a sensor whose resistance changes as its temperature changes. The resistance increases as the temperature of the sensor increases. The resistance vs temperature relationship is well known and is repeatable over time. An RTD is a passive device. It does not produce an output on its own. External electronic devices are used to measure the resistance of the sensor by passing a small electrical current through the sensor to generate a voltage. Typically 1 mA or less measuring current, 5 mA maximum without the risk of self-heating.

RTDs are built to several standardized curves and tolerances. The most common standardized curve is the ‘DIN’ curve. The curve describes the resistance vs temperature characteristics of a Platinum, 100 ohm sensor, the standardized tolerances, and the measurable temperature range.

The DIN standard specifies a base resistance of 100 ohms at 0°C, and a temperature coefficient of .00385 Ohm/Ohm/°C. The nominal output of a DIN RTD sensor is shown below:

There are three standard tolerance classes for DIN RTDs. These tolerances are defined as follows:

DIN Class A: ±(0.15 + .002 |T|°C)

DIN Class B: ±(0.3 + .005 |T|°C)

DIN Class C: ±(1.2 + .005 |T|°C)

Features:

Application/Usage: Industrial
Material: Stainless Steel
Accuracy: Class B

Product Details:

The pt100 is one of the most accurate temperature sensors. Not only does it provide good accuracy, it also provides excellent stability and repeatability. Pt100 are also relatively immune to electrical noise and therefore well suited for temperature measurement in industrial environments, especially around motors, generators and other high voltage equipment.

We are engaged in offering best quality RTD PT-100 Temprature Sensor to our respected clients

Product Details:

We are engaged in offering S Type Thermocouple to our respected clients.

Thermocouple Type S can be used in oxidising or inert atmospheres continuously at temperatures up to 1600°C and for brief periods up to 1700°C. For high temperature work, insulators and sheaths made from high purity recrystallised alumina are used. In fact, in all but the cleanest of applications, the device needs protection in the form of an impervious sheath since small quantities of metallic vapour can cause deterioration and a reduction in the EMF generated.

Continuous use at high temperatures also causes degradation, and there is the possibility of diffusion of rhodium into the pure platinum conductor - leading to a reduction in output.

Features: 

Material: Stainless Steel
Accuracy: Class A
Price Range- 200/- to 5000/- piece

Product Details:

Aimed at a prosperous growth in this domain, we are engaged in offering an excellent quality range of Wire Type RTD Sensors.

Applications:

• Power Industries
• Textile Industries
• Laboratories
• Chiller Plant / Cooling Tower
• Pharmaceuticals Industries
• Beverages & Cold Storage

Configuration:Simplex (2/3 Wire) / Duplex (4/6 Wire)
Sheath MOC:SS304/316 (According to process)
Process Connection:Fixed or Adjustable,BSP,NPT or as per mounting,MOCSS (304,316)
Accuracy:Class A,1/3 B,B,2B

Product Details:

Being an eminent organization in the industry, we are involved in providing a premium quality range of J Type Thermocouple.

Temperature Range: -50 To 600

Additional Information:

• Production Capacity: As per Need
• Delivery Time: Within 7 to 10 Days
• Packaging Details: Product pack in polythene bag and outer packaging in corrugated box

Product Details:

Relying on our expertise in this domain, we are engaged in offering J Type Thermocouple to our respected clients.

Features: High stability
Superior performance
User-friendly device
Reliable performance
Accurate temperature measurement
Wide measurement range.

Junction Type:Grounded/Ungrounded
Configuration:Simplex / Duplex / Multipoints
Application:Plastic Industries Injection Molding Blow Molding Extrude M/c.,Packaging M/c.,Printing M/c
Length:1 M

Product Details:

  

• MaterialPlastic
• Power SupplyElectric
• Frequency50Hz
• BrandRecos
• ShapeRectangular
• Operating Voltage1.10 to 30VDC

Product Details:

Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality range of J type Temperature Sensor.

These thermocouple cables are used in a wide variety difficult temperature measuring applications due to their flexibility and durability. the thermocouple cables provided by us are developed utilizing premium quality two dissimilar metals. our offered thermocouple cables are inspected on various parameters by our quality experts for ensuring its flawlessness.

Freequency:50HZ
Brand:Recos

Product Details:

Type K thermocouples usually work in most applications as they are nickel based and exhibit good corrosion resistance. It is the most common sensor calibration type providing the widest operating temperature range. Due to its reliability and accuracy the Type K thermocouple is used extensively at temperatures up to 2300°F (1260°C). This type of thermocouple should be protected with a suitable metal or ceramic protection tube, especially in reducing atmospheres. In oxidizing atmospheres, such as electric furnaces, tube protection is not always necessary when other conditions are suitable; however, it is recommended for cleanliness and general mechanical protection. Type K will generally outlast Type J because the JP wire rapidly oxidizes, especially at higher temperatures.

We are involved in providing a premium quality range of K Type Thermocouple

Temperature Range:1250 deg C

Additional Information:

• Production Capacity: As per Need
• Delivery Time: Within 7 to 10 Days
• Packaging Details: Product pack in polythene bag and outer packaging in corrugated box

Product Details:

Being an eminent organization in the industry, we are involved in providing a premium quality range of Recos Silver Wire Type Thermocouple,

Additional Information:

• Production Capacity: 2000
• Delivery Time: 2-3 days

Product Details:

With our in-depth knowledge of this domain, we are actively engaged in offering an excellent quality assortment of Head Type Thermocouple.